# 2 layer

**URL:** <https://community.aisler.net/t/2-layer/4568>\
**Category:** PCB Q&A\
**Created:** [December 14, 2024, 7:29am UTC](https://community.aisler.net/t/2-layer/4568 "2024-12-14T07:29:24Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![projects-nbahn-at](https://community-cdn.aisler.net/letter_avatar_proxy/v4/letter/p/73ab20/32.png) [@projects-nbahn-at](https://community.aisler.net/u/projects-nbahn-at)\
**Post date:** [December 14, 2024, 7:29am UTC](https://community.aisler.net/t/2-layer/4568/1 "2024-12-14T07:29:24Z")

</div>

By default, a board is labeled with layer 25 (tName). I would also like to have layer 27 (tValue) printed on the board. What do I have to do when ordering?

---

<div class="post-metadata">

**Author:** ![Thea](https://community-cdn.aisler.net/user_avatar/community.aisler.net/thea/32/1177_2.png) [@Thea](https://community.aisler.net/u/Thea)\
**Post date:** [January 3, 2025, 7:57pm UTC](https://community.aisler.net/t/2-layer/4568/2 "2025-01-03T19:57:42Z")

</div>

Hi there 👋 we hope you had a great start into the new year 🙂

One way is to include the layer in a custom Gerber Output which you can generate using EAGLE, we provide a how-to for that: [Exporting a custom Gerber file from EAGLE](https://community.aisler.net/t/exporting-a-custom-gerber-file-from-eagle/2309), please note that we do not support E-Testing or Assembly for this format.

If you have access to Fusion360, we recommend importing your design and create a custom ODB++ Output which supports E-Testing and Assembly.