# Adding Our Logo to Your PCB

**URL:** <https://community.aisler.net/t/adding-our-logo-to-your-pcb/5382>\
**Category:** 💶 Sponsoring\
**Created:** [September 4, 2025, 2:17pm UTC](https://community.aisler.net/t/adding-our-logo-to-your-pcb/5382 "2025-09-04T14:17:24Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Manuel-from-AISLER](https://community-cdn.aisler.net/user_avatar/community.aisler.net/manuel-from-aisler/32/184_2.png) [@Manuel-from-AISLER](https://community.aisler.net/u/Manuel-from-AISLER)\
**Post date:** [September 4, 2025, 2:17pm UTC](https://community.aisler.net/t/adding-our-logo-to-your-pcb/5382/1 "2025-09-04T14:17:25Z")

</div>

# Adding Our Logo to Your PCB

Placing a graphic on the silkscreen usually requires importing it into your EDA tool — a process that can be tricky, error-prone, and tool-specific.  
To make this easier, we provide a **simple placeholder method** : just draw a rectangle, and our system will automatically replace it with our logo.

## How to Place the Logo

Draw a **rectangle** placeholder on the desired **silkscreen** layer and make sure the rectangle follows these rules:

- Composed of **four individual lines** (avoid using a rectangle tool if it causes recognition issues).
- Line width: **3.3 mil (0.08382 mm)**.
- Orientation: horizontal **or** vertical.
- Aspect ratio: **4:1** (long side / short side).
- Long side length: **30–60 mm**.

 ![logo_placeholders_in_eda](https://community.aisler.net/uploads/default/original/2X/c/c3d988254e0a9f74438d97dbeca57aff47699055.png)

Once detected, our system automatically replaces the placeholder with our logo and shows a **Processing Note** in our board viewer.

 ![logos_in_board_viewer](https://community.aisler.net/uploads/default/original/2X/d/db0ce24d4bcec5792391d422c4cfbe304ddb4bb7.png)

## Why This Is Easier

- No need to import external graphics into your EDA tool.
- No risk of scaling errors or wrong layers.
- Works consistently across different CAD tools.
- Place as many placeholders as you want — each will be replaced with the logo.

## Tips & Tricks

- If your EDA tool’s rectangle function prevents detection, draw the lines manually.
- Using this method will give you a discount during the checkout:

 ![Untitled design(1)](https://community.aisler.net/uploads/default/original/2X/1/19a9b4f5b6407391b3ce98aa814666db4f21e9dc.png)