# Do not reset stencil order when switching PCB Type

**URL:** <https://community.aisler.net/t/do-not-reset-stencil-order-when-switching-pcb-type/4075>\
**Category:** 🥂 Implemented\
**Created:** [June 24, 2024, 11:34am UTC](https://community.aisler.net/t/do-not-reset-stencil-order-when-switching-pcb-type/4075 "2024-06-24T11:34:33Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![uwe](https://community-cdn.aisler.net/letter_avatar_proxy/v4/letter/u/c57346/32.png) [@uwe](https://community.aisler.net/u/uwe)\
**Post date:** [June 24, 2024, 11:34am UTC](https://community.aisler.net/t/do-not-reset-stencil-order-when-switching-pcb-type/4075/1 "2024-06-24T11:34:33Z")

</div>

On the order page, when switching between “einfach” and “Komplex” stallar stencil setting gets removed. It would be nice, if the setting woyld be kept.

---

<div class="post-metadata">

**Author:** ![Tim-from-AISLER](https://community-cdn.aisler.net/user_avatar/community.aisler.net/tim-from-aisler/32/24_2.png) [@Tim-from-AISLER](https://community.aisler.net/u/Tim-from-AISLER)\
**Post date:** [June 26, 2024, 8:42am UTC](https://community.aisler.net/t/do-not-reset-stencil-order-when-switching-pcb-type/4075/2 "2024-06-26T08:42:24Z")

</div>

Good point @uwe! I’ll take this to our improvement list.

---

<div class="post-metadata">

**Author:** ![Tim-from-AISLER](https://community-cdn.aisler.net/user_avatar/community.aisler.net/tim-from-aisler/32/24_2.png) [@Tim-from-AISLER](https://community.aisler.net/u/Tim-from-AISLER)\
**Post date:** [July 25, 2024, 8:54am UTC](https://community.aisler.net/t/do-not-reset-stencil-order-when-switching-pcb-type/4075/3 "2024-07-25T08:54:05Z")

</div>

During our latest checkout improvements we incorporated your feedback @uwe Thank you very much for this!