# \[KiCad\] PCB Templates for download

**URL:** <https://community.aisler.net/t/kicad-pcb-templates-for-download/3033>\
**Category:** 😀 No Fix Needed\
**Tags:** pcb-design\
**Created:** [September 4, 2023, 11:40am UTC](https://community.aisler.net/t/kicad-pcb-templates-for-download/3033 "2023-09-04T11:40:15Z")\
**Posts on this page:** 5\
**Page:** 1

<div class="post-metadata">

**Author:** ![i440bx](https://community-cdn.aisler.net/letter_avatar_proxy/v4/letter/i/ea5d25/32.png) [@i440bx](https://community.aisler.net/u/i440bx)\
**Post date:** [September 4, 2023, 11:40am UTC](https://community.aisler.net/t/kicad-pcb-templates-for-download/3033/1 "2023-09-04T11:40:15Z")

</div>

Hello all,

first of all I would like to say that I am not an electrical engineer but create circuit boards as a hobby.

If you create a PCB with KiCad “quick and dirty” and use the default settings, you will quickly find that the default settings are not optimal or certain design rules are not followed.

I have created two templates for Aisler that apply to the 2-layer and 4-layer PCBs.

I would like to attach the templates as a .zip file, but I can’t upload any files. Is there an eMail I can send them to? Then you can add them to the desing rules page so someone can download them and create a PCB directly following Aisler’s rules.

The templates are certainly not complete or 100% correct, but can serve as a basis.

Greetings,  
Robert

---

<div class="post-metadata">

**Author:** ![Thea](https://community-cdn.aisler.net/user_avatar/community.aisler.net/thea/32/1177_2.png) [@Thea](https://community.aisler.net/u/Thea)\
**Post date:** [September 4, 2023, 12:03pm UTC](https://community.aisler.net/t/kicad-pcb-templates-for-download/3033/2 "2023-09-04T12:03:13Z")

</div>

Hi Robert,

Thank you for your thoughts, we already provide templates for KiCad on our GitHub.

> <https://github.com/AislerHQ/aisler-support/tree/master/kicad/template>
>
> //github.com/AislerHQ/aisler-support/tree/master/kicad/template

It seems like you didn’t know about it, would you have a recommendation how we could communicate that we offer these templates?

---

<div class="post-metadata">

**Author:** ![i440bx](https://community-cdn.aisler.net/letter_avatar_proxy/v4/letter/i/ea5d25/32.png) [@i440bx](https://community.aisler.net/u/i440bx)\
**Post date:** [September 4, 2023, 12:06pm UTC](https://community.aisler.net/t/kicad-pcb-templates-for-download/3033/3 "2023-09-04T12:06:08Z")

</div>

Ohoo! I did not knew that… Spend to much time for nothing 😅

The i would recommend to add the link to this page:

> [@PCB Design Rules](https://community.aisler.net/t/pcb-design-rules/41):
>
> AISLER’s PCB Design Rules Last Updated: 05/12/2024 Board rating We offer 2 Layer PCBs with an option of HASL and ENIG as surface finish, if you use small drills, castellated edges or small trace width/spacing it is required to choose ENIG as surface finish. feature HASL allowed (simple) ENIG required (complex) min. drill diameter ≥ 0.3 mm ≥ 0.25 mm contains castellated holesheavy_multiplication_xheavy_check_markmin. trace width/spacing (Cu 35 µm) 200 µm/150 µm 125 µm/125 µm …

If you smash “aisler design rules” to google, this is the first result. If you add the github link to the page it would be great!

---

<div class="post-metadata">

**Author:** ![Thea](https://community-cdn.aisler.net/user_avatar/community.aisler.net/thea/32/1177_2.png) [@Thea](https://community.aisler.net/u/Thea)\
**Post date:** [September 8, 2023, 12:35pm UTC](https://community.aisler.net/t/kicad-pcb-templates-for-download/3033/4 "2023-09-08T12:35:34Z")

</div>

I have updated the DRC page to link to the templates.

---

<div class="post-metadata">

**Author:** ![i440bx](https://community-cdn.aisler.net/letter_avatar_proxy/v4/letter/i/ea5d25/32.png) [@i440bx](https://community.aisler.net/u/i440bx)\
**Post date:** [September 8, 2023, 5:10pm UTC](https://community.aisler.net/t/kicad-pcb-templates-for-download/3033/5 "2023-09-08T17:10:11Z")

</div>

Ah, thats nice solved. It jumps directly into the eye