# National Instruments Ultiboard

**URL:** <https://community.aisler.net/t/national-instruments-ultiboard/97>\
**Category:** 💻  Uploading your design\
**Tags:** beautiful-boards, pcb-design, gerber, gerberx2, pcb-design-tool-support, gerber-export\
**Created:** [December 21, 2021, 2:09pm UTC](https://community.aisler.net/t/national-instruments-ultiboard/97 "2021-12-21T14:09:28Z")\
**Posts on this page:** 1\
**Page:** 1

<div class="post-metadata">

**Author:** ![Thea](https://community-cdn.aisler.net/user_avatar/community.aisler.net/thea/32/1177_2.png) [@Thea](https://community.aisler.net/u/Thea)\
**Post date:** [December 21, 2021, 2:09pm UTC](https://community.aisler.net/t/national-instruments-ultiboard/97/1 "2021-12-21T14:09:28Z")

</div>

### About this tutorial

AISLER understands Gerber files generated from National Instruments Ultiboard. This tutorial shows you in **four** easy steps how your Ultiboard export will always succeed when imported.

### Step 1: Use our Export configuration

- Download the NI config-File for AISLER on our [Github](https://github.com/AislerHQ/aisler-support/blob/master/output-configuration/aisler_ultiboard_export.uxcfg)
- Store it on your PC.

### Step 2: Rename your gerber files in the following format:

| Gerber Layer Name | Layer |
| --- | --- |
| project\_name.toplayer.ger | Top Layer |
| project\_name.bottomlayer.ger | Bottom Layer |
| project\_name.topsoldermask.ger | Top Soldermask |
| project\_name.bottomsoldermask.ger | Bottom Soldermask |
| project\_name.topsilkscreen.ger | Top Silkscreen |
| project\_name.bottomsilkscreen.ger | Bottom Silkscreen |
| project\_name.boardoutline.ger | Board Outline |
| project\_name.xln | PTH Drills |
| project\_name\_npth.xln | NPTH Holes |

### Step 3: Zip them up

Please zip your Gerber-Files

### Step 4: Profit 😉

[Upload your project](http://aisler.net/p/new?pk_campaign=ni-ultiboard-tutorial&pk_source=kb)