# No silkscreen on PCB board

**URL:** <https://community.aisler.net/t/no-silkscreen-on-pcb-board/3138>\
**Category:** ℹ️ Q & A Help Zone\
**Tags:** pcb-design\
**Created:** [September 27, 2023, 1:43pm UTC](https://community.aisler.net/t/no-silkscreen-on-pcb-board/3138 "2023-09-27T13:43:51Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![tail](https://community-cdn.aisler.net/letter_avatar_proxy/v4/letter/t/e9c0ed/32.png) [@tail](https://community.aisler.net/u/tail)\
**Post date:** [September 27, 2023, 1:43pm UTC](https://community.aisler.net/t/no-silkscreen-on-pcb-board/3138/1 "2023-09-27T13:43:52Z")

</div>

Hello everyone

I don’t want any silkscreen on my board, where do i mention it or unchecked it? once the projet have been push to my aisler account for the Fab.

Thanks

---

<div class="post-metadata">

**Author:** ![Thea](https://community-cdn.aisler.net/user_avatar/community.aisler.net/thea/32/1177_2.png) [@Thea](https://community.aisler.net/u/Thea)\
**Post date:** [September 27, 2023, 2:24pm UTC](https://community.aisler.net/t/no-silkscreen-on-pcb-board/3138/2 "2023-09-27T14:24:16Z")

</div>

You can disable the silkscreen in the Board setup of your project, please not you cannot easily undo this.

 ![grafik](https://community.aisler.net/uploads/default/original/2X/2/2063a31e8fd7c6c10e6d5db081c017036998ff18.png)

---

<div class="post-metadata">

**Author:** ![tail](https://community-cdn.aisler.net/letter_avatar_proxy/v4/letter/t/e9c0ed/32.png) [@tail](https://community.aisler.net/u/tail)\
**Post date:** [September 27, 2023, 2:27pm UTC](https://community.aisler.net/t/no-silkscreen-on-pcb-board/3138/3 "2023-09-27T14:27:09Z")

</div>

OK, 👍 thank you for the answer

---

<div class="post-metadata">

**Author:** ![system](https://community-cdn.aisler.net/user_avatar/community.aisler.net/system/32/28_2.png) [@system](https://community.aisler.net/u/system)\
**Post date:** [May 7, 2025, 3:41pm UTC](https://community.aisler.net/t/no-silkscreen-on-pcb-board/3138/4 "2025-05-07T15:41:42Z")

</div>

This topic was automatically closed 12 hours after the last reply. New replies are no longer allowed.