# Würth press fit (THT) connectors

**URL:** <https://community.aisler.net/t/wurth-press-fit-tht-connectors/3928>\
**Category:** ℹ️ Q & A Help Zone\
**Tags:** pcb-design\
**Created:** [April 22, 2024, 8:03am UTC](https://community.aisler.net/t/wurth-press-fit-tht-connectors/3928 "2024-04-22T08:03:36Z")\
**Posts on this page:** 4\
**Page:** 1

<div class="post-metadata">

**Author:** ![jan-lukas-teichgraeb](https://community-cdn.aisler.net/letter_avatar_proxy/v4/letter/j/e9c0ed/32.png) [@jan-lukas-teichgraeb](https://community.aisler.net/u/jan-lukas-teichgraeb)\
**Post date:** [April 22, 2024, 8:03am UTC](https://community.aisler.net/t/wurth-press-fit-tht-connectors/3928/1 "2024-04-22T08:03:36Z")

</div>

I have a question regarding the Würth press fit connectors.  
As described in this pdf or the attached screenshot there needs to be a specific hole size and copper thickness in the vias to use them.

Can you tell me whether this is compatible with your production technology?

Thank you for your time and best regards  
Lukas

> **[we-ics-datasheet-power-one-press-fit.pdf](https://www.powerelement.com/media_content/pdf1/we-ics-datasheet-power-one-press-fit.pdf)**
>
> 231.98 KB

 ![Screenshot 2024-04-22 095848](https://community-cdn.aisler.net/uploads/default/original/2X/f/f0da6711b8ce89dc9ab3b90b104d3d18d0f60268.png)

---

<div class="post-metadata">

**Author:** ![Thea](https://community-cdn.aisler.net/user_avatar/community.aisler.net/thea/32/1177_2.png) [@Thea](https://community.aisler.net/u/Thea)\
**Post date:** [April 22, 2024, 1:35pm UTC](https://community.aisler.net/t/wurth-press-fit-tht-connectors/3928/2 "2024-04-22T13:35:40Z")

</div>

Plating holes add around 22 µm of bare copper. The thickness of ENIG varies around 4-7 µm HASL around 1 - 40 µm.

These numbers are off the top of my head. @Manuel-from-AISLER Can you verify the numbers with our production people?

---

<div class="post-metadata">

**Author:** ![Thea](https://community-cdn.aisler.net/user_avatar/community.aisler.net/thea/32/1177_2.png) [@Thea](https://community.aisler.net/u/Thea)\
**Post date:** [May 13, 2024, 2:30pm UTC](https://community.aisler.net/t/wurth-press-fit-tht-connectors/3928/3 "2024-05-13T14:30:49Z")

</div>

We are reaching out to Würth regarding Press Fit Components, for now, we don’t have a process in Place to ensure the right drill tool diameter. I’ll keep you updated.

---

<div class="post-metadata">

**Author:** ![system](https://community-cdn.aisler.net/user_avatar/community.aisler.net/system/32/28_2.png) [@system](https://community.aisler.net/u/system)\
**Post date:** [September 11, 2026, 6:50am UTC](https://community.aisler.net/t/wurth-press-fit-tht-connectors/3928/4 "2026-09-11T06:50:46Z")

</div>

This topic was automatically closed 12 hours after the last reply. New replies are no longer allowed.