2 Layer 1.6mm ENIG Design Rules

[Thea]

2 Layer 1.6mm ENIG

Last Updated: 22/11/2024
Imperial measures are rounded from metric measurements.

Design Rule Files

Do you want to start right away? We provide design rule files for Eagle, KiCad and DipTrace on Github .

The rules listed here shall always be used as reference.

PCB Dimension

We accept PCBs within these dimensions for our prototype service, contact our support if your design does not meet these criteria.

	min. dimension	>10 mm / >0.4 in
	max. size	400 x 400 mm / 15.74 in x 15.74

Surface Finish

We use Electroless Nickel Immersion Gold (ENIG) this surface finish offers good surface planarity and high oxidation resistance.
.

	surface finish	ENIG
	Nickel thickness Gold thickness	4.0 µm -7.0 µm 0.05 µm -0.1 µm

Minimum Copper Features

Description	Capability
	min. tracewidth	125 µm / 5 mil
	min. SMD pad size	200 µm / 8 mil

Minimum Copper Spacing / Clearance

	min. spacing copper / copper	125 µm / 5 mil
	min. spacing NPTH / copper	250 μm / 10 mil
	min. spacing NPTH slot <1.8 mm / copper	300 μm / 12 mil
	min. spacing NPTH slot >= 1.8 mm / copper	300 μm / 12 mil
	min. copper to edge clearance	300 μm / 12 mil

Plated Through Hole (PTH)

All drills with a diameter larger than 0.45 mm are categorized as plated through hole for component mounting, we will enlarge the drill diameter to compensate for the copper plating thickness to ensure that components can be mounted more easily.

	min. PTH drill size	0.5 mm / 0.02 in
	max. PTH drill size	5.6 mm / 0.22 in
	min. PTH annular ring	300 μm / 12 mil

Vias

All drills with a diameter up to 0.45 mm are categorized as via drill and will not be subjected to any adjustments by us.

	min. via drill	0.25 mm / 10 mil
	max. via drill	0.45 mm / 20 mil
	min. via annular ring	100 μm / 4 mil

Non Plated Through Hole (NPTH)

	0.5 mm / 20mil
	5.6 mm / 0.22 in

Minimum Drill Spacing

	min. drill spacing	300 μm / 12 mil

NPTH Slots

NPTHs Slots that are smaller than 1.8 mm are nibbled. This is a time-intensive process, so we reserve the right to limit the use of nibble slots in a design. Diameters above 1.8 mm will be milled and are thus preferred.

	preferred NPTH slot diameter	>= 1.8 mm / 0.07 in
	min. NPTH slot diameter	0.8 mm / 0.032 in
	max. NPTH slot diameter	No restriction

PTH Slots

	min. PTH slot diameter	0.7 mm / 0.028 in
	max. PTH slot diameter	2.6 mm / 0.11 in
	min. PTH slot annular ring	300 µm / 12 mil

Silkscreen

We use Peters SD2692 ink for the silkscreen on our PCBs and apply it using the direct printing method. The smallest supported width is 150 µm / 6 mil, all silkscreen features with a width less of that will be adjusted. Silkscreen printed on pads is not supported, we use openings in the soldermask as reference to cut away / remove the silkscreen in the affected area. Do not use the silkscreen to produce large fillings, designs which cover more than 25% per PCB side will be rejected.

	min. silkscreen text height	800µm / 32 mil
	min. spacing silkscreen / pad	125 µm / 5 mil
	silkscreen on pad	not supported
	min. spacing silkscreen / edge	400 µm / 16 mil
	max. Silkscreen	25% of Board size

Soldermask

We use high-quality Peters Elpemer AS 2467 SM-DG green soldermask which is well suited for the ENIG finish. Please refer to our soldermask specification for the electrical properties of the soldermask.

		min. soldermask dam	75 µm / 3 mil

Castellated Edges

Castellated edges are manufactured free of charge, please refer to our documentation on how you can set them up.

	castellated edges	Supported

Additional Notes

• Buried, blind, micro or tented vias are not supported.
• User-defined subpanels are not allowed, see also here.
• Pressfit components are currently not supported.