📖 Knowledge Base 🔎 Design Rules
| Topic | Replies | Views | Activity | |
|---|---|---|---|---|
|
2 Layer 1.6 mm 35 µm HASL Design Rules
2 Layer 1.6mm 35 µm HASL Last Updated: 07/07/2025 Imperial measures are rounded from metric measurements. Design Rule Files Do you want to start right away? We provide design rule files for Eagle, KiCad and DipTrace on… |
|
0 | 8392 | February 28, 2024 |
|
4 Layer 35µm ENIG Design Rules
4 Layer 35µm ENIG Last Updated: 07/07/2025 Imperial measures are rounded from metric measurements. Valid for 0.8 mm and 1.6 mm PCB thickness Design Rule Files Do you want to start right away? We provide design rule fi… |
|
0 | 10219 | February 28, 2024 |
|
2 Layer 1.6mm 35 µm ENIG Design Rules
2 Layer 1.6 mm 35 µm ENIG Last Updated: 07/07/2025 Imperial measures are rounded from metric measurements. Design Rule Files Do you want to start right away? We provide design rule files for Eagle, KiCad and DipTrace o… |
|
0 | 5140 | February 28, 2024 |
|
About the 🔎 Design Rules category
|
|
0 | 310 | October 17, 2022 |
|
6L+ Layer 35µm ENIG Design Rules
|
|
0 | 990 | December 5, 2025 |
|
2 Layer 1.6mm 70µm ENIG Design Rules
|
|
1 | 437 | December 5, 2025 |
|
2 Layer 1.6mm 70µm HASL Design Rules
|
|
0 | 501 | December 4, 2025 |
|
Soldermask Opening Adjustment
|
|
0 | 933 | December 18, 2023 |
|
Component Orientation and Polarity Rules for Assembly
|
|
0 | 5490 | August 10, 2023 |
|
AISLER Production Panel Specification
|
|
1 | 1446 | June 30, 2025 |
|
Stencil Aperture Adjustment
|
|
0 | 659 | December 8, 2023 |
|
Castellated edges
|
|
0 | 5009 | December 17, 2021 |
|
Custom Bridges and Frames
|
|
0 | 5772 | December 17, 2021 |
|
PCB Design Rules
|
|
1 | 48906 | September 25, 2024 |
|
Plated and Non-Plated Slots
|
|
0 | 6243 | October 16, 2023 |
|
Plated and Non-Plated Holes
|
|
0 | 4571 | December 17, 2021 |